[Thinlinc-technical] Problem with thinlinc

[Peter Åstrand]

Good, now vsmserver can talk to vsmagent. Do you know what the problem 
was?

The error you get now ("Cannot make/remove an entry...") typically happens 
when you have not finished the tl-setup wizard. Make sure to run 
/opt/thinlinc/sbin/tl-setup.

Regards,
Peter

On Thu, 19 Jan 2012, Shilpa.Shilpa at shell.com wrote:

> Now in my vsmagent.log I am getting as
>
> 2012-01-19 06:03:19 INFO vsmagent: VSM Agent version 3.3.0 build 3311 started
> 2012-01-19 06:03:19 INFO vsmagent: My public hostname is 145.59.192.218
> 2012-01-19 06:03:19 DEBUG vsmagent: IPs allowed to do restricted operations: ['127.0.0.1', '127.0.0.1', '127.0.0.1']
> 2012-01-19 06:03:19 DEBUG vsmagent.HA: Allowed HA update IPs: []
> 2012-01-19 06:03:19 DEBUG vsmagent: Running sysctl -w net.ipv4.ip_local_port_range=32768 65535
> 2012-01-19 06:03:26 DEBUG vsmagent: Handling connection from ('127.0.0.1', 1023)
> 2012-01-19 06:03:46 DEBUG vsmagent: Handling connection from ('127.0.0.1', 1023)
> 2012-01-19 06:04:26 DEBUG vsmagent: Handling connection from ('127.0.0.1', 1023)
> 2012-01-19 06:04:55 DEBUG vsmagent: Handling connection from ('127.0.0.1', 1023)
> 2012-01-19 06:04:55 DEBUG vsmagent: Handling connection from ('127.0.0.1', 1022)
> 2012-01-19 06:04:55 DEBUG vsmagent.extproc: Starting process ['/opt/thinlinc/sbin/encrypt-vnc-pw']
> 2012-01-19 06:04:55 DEBUG vsmagent.extproc: ['/opt/thinlinc/sbin/encrypt-vnc-pw'] exited with exit code 0
> 2012-01-19 06:04:55 DEBUG vsmagent: Got encrypted vnc password for dev.admin1
> 2012-01-19 06:04:55 WARNING tl-session: pam_open_session failed: 14 (Cannot make/remove an entry for the specified session)
>
>
> -----Original Message-----
> From: thinlinc-technical-bounces at lists.cendio.se [mailto:thinlinc-technical-bounces at lists.cendio.se] On Behalf Of Peter Åstrand
> Sent: Thursday, January 19, 2012 4:25 PM
> To: Shilpa, Shilpa SHLOFF-WIPRO
> Cc: thinlinc-technical at lists.cendio.se
> Subject: Re: [Thinlinc-technical] Problem with thinlinc
>
> On Thu, 19 Jan 2012, Shilpa.Shilpa at shell.com wrote:
>
>> 2012-01-19 05:36:49 INFO vsmserver.session: User with uid 16777216
>> (dev.admin1) requested a new session
>> 2012-01-19 05:36:49 INFO vsmserver.session: User dev.admin1 is listed
>> for explicit agent selection in /vsmserver/explicit_agentselection.
>> Selecting 145.59.192.218 as agent host
>>
>> 2012-01-19 05:36:49 WARNING vsmserver.loadinfo: VSM Agent
>> 145.59.192.218:904 responded with permission denied in request for loadinfo. Marking as down.
>
> The parameter explicit_agentselection should only be used in special cases. Disable it with:
>
> # tl-config /vsmserver/explicit_agentselection=""
> # service vsmserver restart
>
> Have you changed any other parameters as well? If you attach vsmserver.hconf and vsmagent.hconf, I can take a look at them. They are in /opt/thinlinc/etc/conf.d/.
>
> In general, if you are having problems like these, you can always raise the debug level to see what's going on:
>
> # tl-config /vsmagent/logging/defaultlevel=DEBUG
> # service vsmagent restart
> # tl-config /vsmserver/logging/defaultlevel=DEBUG
> # service vsmserver restart
>
> Regards,
> ---
> Peter Åstrand		ThinLinc Chief Developer
> Cendio AB		http://www.cendio.com
> Wallenbergs gata 4
> 583 30 Linköping	Phone: +46-13-21 46 00
>
>


---
Peter Åstrand		ThinLinc Chief Developer
Cendio AB		http://www.cendio.com
Wallenbergs gata 4
583 30 Linköping	Phone: +46-13-21 46 00